GSK 25iMb CNC System Applies on Pump and End-face Machining of Foshan Company
Customer Requirement:
- After the GSK 25iMb system machining center processes the stainless steel pumping, end enclosure and assembly gear etc. by using the Shandong VMC640 machine tool, the flow rate should be more than 70L/hour in the state of 3kg pressure of pumping output end.
Troubleshooting:
- Customize the fixture workpiece project and machining technology based upon the components from customer.
- It is recommended and used the reliable machining tools;
- The precision of dimension is stable within 0.01mm after debugging of each procedure, which conforms to the requirement of design.
- Multi-procedure can be normally and consecutively performed to meet the batch production.
- The processed component assembles with other components that can be satisfied with the customer’s requirements.
Processing Effect:
- The machining precision of the pumping and end-face dimension should be controlled within 0.01mm; to test five sets of pumps after assembling the components such as the gears; the flow rate reaches to 90L/hour in the state of 3kg pressure of pump output end, which can be satisfied with the customer's requirements.
